Chartreuse 7531
Lead Free Enamels are enamel colour
suitable for copper, gold or silver pieces and as underlined in the title, they
do not contain “Lead”. If you want to enamel copper pieces than we recommend
you to select a copper of an irreproachable electrolytic quality. The thickness
of the metal is a factor of success or failure while enamelling, and we
consider that the optimum thickness is from 3/10 mm for the small objects to
6/10 for the larger ones. Counter-enamelling that is enamelling on the reverse
side, is essential as it stabilizes the tensions of the metal.
The
result depends on the metal used but also on its previous treatment. Both sides
of the copper plate must be cleaned before use, either with Picklean®, or with
a chemical process, as follows :
1.
immerse the copper plate for 15 minutes in a solution of alcohol vinegar and
salt ( 1 spoon of salt for 1/4 litre vinegar),
2.
rinse it carefully in pure water,
3.
wipe it with a non fluffy cloth. The plate is then ready for enamelling.